•  Site Identification & Acquisition – Helping clients secure land for retail, office, healthcare, education, and mixed-use projects.
   
•  Feasibility Studies – Analysis of access, zoning, traffic impact, and site restrictions.
   
•  Environmental & Geotechnical Assessments – Soil stability, drainage, and environmental impact compliance.
   
•  Zoning & Permitting – Navigating city and county codes for approval. 

•  Cost Analysis – Providing experience from pre-scope with site acquisition teams and county/city officials. To building a SOW, Bill of Materials and Motion of procedures for teams to begin work.
   

•  Vegetation & Debris Removal – Safe clearing of trees, brush, stumps, and debris to prepare for commercial-scale construction.
   
•  Site Grading & Leveling – Precise grading for building pads, roadways, and drainage systems to meet city and county engineering standards.
   
•  Erosion & Stormwater Control – Implementing silt fencing, retention ponds, and proper drainage systems to comply with environmental regulations.
   
•  Soil Compaction & Stabilization – Ensuring the site can withstand heavy commercial loads such as multi-story structures and high-traffic areas.
   
•  Utility Access Preparation – Clearing and grading for water, sewer, gas, and electrical tie-ins.
   

•  Engineering & Structural Design – Collaborating with licensed engineers to determine the best foundation system for soil conditions and building load requirements.
   
•  Soil Analysis & Geotechnical Testing – Confirming stability and identifying the need for reinforcement or soil stabilization.
   
•  Foundation Type Selection – From shallow spread footings and mat slabs to deep pile or caisson foundations for heavy or multi-story buildings.
   
•  Drainage & Waterproofing Design – Planning integrated systems to prevent water intrusion and maintain long-term durability.
   
•  Code & ADA Compliance – Ensuring foundations meet all applicable building codes, accessibility requirements, and seismic/wind load standards where applicable.
   

•  Formwork Construction – Building precise molds for slab-on-grade, footings, grade beams, and specialized commercial foundation layouts.
   
•  Rebar & Steel Reinforcement – Installing engineered steel reinforcement to strengthen the foundation and support multi-story structures.
   
•  High-Strength Concrete Pouring – Using commercial-grade concrete mixes designed for durability, load-bearing capacity, and environmental resilience.
   
•  Curing & Moisture Control – Monitoring curing schedules to ensure optimal strength development. 

•  Waterproofing & Sealants – Applying protective coatings, membranes, and barriers to prevent water intrusion and extend foundation life. 

•  Inspection & Compliance – Coordinating with inspectors to meet local and state code requirements at every stage.
   

•  Structural Steel Systems – Fabrication and erection of steel columns, beams, and trusses for strength and flexibility in multi-story construction.
   
•  Precast & Cast-in-Place Concrete – High-strength solutions for load-bearing walls, floors, and core structures such as stairwells and elevator shafts.
   
•  Hybrid Systems – Combining steel, concrete, and engineered wood for efficiency and design flexibility.
   
•  Load-Bearing Analysis & Engineering – Working with structural engineers to ensure compliance with seismic, wind, and heavy-load requirements. 

•  Code & Safety Compliance – Adhering to IBC (International Building Code), local jurisdictional codes, and OSHA safety standards during installation. 

•  Expansion & Retrofit Capabilities – Reinforcing or modifying structures for future growth or adaptive reuse projects.
   

•  Roofing Systems – Installation of flat and low-slope commercial roofing systems, including TPO, EPDM, PVC, and modified bitumen.
   
•  Exterior Wall Systems – Masonry, precast panels, curtain walls, insulated metal panels, and cladding for durability and aesthetics.
   
•  Glazing & Storefront Systems – Energy-efficient windows, glass curtain walls, and entry systems designed for safety and performance.
   
•  Insulated & Weather-Sealed Openings – Commercial-grade doors, fire-rated assemblies, and impact-resistant solutions.
   
•  Air & Moisture Barriers – Ensuring the building remains dry, energy-efficient, and mold-free. 

•  Thermal Performance – Meeting or exceeding ASHRAE and energy code requirements for insulation and efficiency.
   

Mechanical (HVAC) Systems

• Ductwork installation for heating, cooling, and ventilation
   
• Air quality systems and energy recovery units
   
• Rooftop units (RTUs) and mechanical chases
   
• Compliance with ASHRAE standards
   

Electrical Systems

• Main service panels and distribution systems
   
• Conduit, wiring, and switchgear installation
   
• Emergency lighting, backup circuits, and grounding systems
   
• Compliance with NEC (National Electrical Code)

Plumbing Systems

• Water supply and distribution systems
   
• Sanitary sewer, grease traps (for restaurants), and stormwater piping
   
• Gas piping and commercial-grade water heaters
   
• ADA-compliant restroom rough-ins

Thermal Insulation

• Spray foam, rigid board, and batt insulation for walls, roofs, and floors
   
• Meeting or exceeding ASHRAE 90.1 and state energy codes
   
• Improving efficiency to lower long-term operating costs
  

Fireproofing Systems

• Spray-applied fire-resistive materials (SFRM) for steel structures
   
• Intumescent coatings for exposed structural elements
   
• Fire-stopping around penetrations and assemblies
   
• Compliance with NFPA standards and IBC requirements

Acoustic & Soundproofing Solutions

• Sound-absorbing insulation for walls, ceilings, and floors
   
• Specialty assemblies for theaters, auditoriums, schools, and healthcare
   
• Acoustic panels and barrier systems to enhance tenant comfort

•  Space Planning & Layouts – Creating functional designs for productivity, customer flow, and compliance.
   
•  Framing & Partitions – Metal stud framing and drywall systems for offices, suites, and commercial layouts.
   
•  Ceiling Systems – Acoustic drop ceilings, decorative finishes, and specialty ceilings for unique spaces.
   
•  Flooring Solutions – Tile, polished concrete, carpet, hardwood, and resilient commercial flooring. 

•  Millwork & Casework – Custom cabinetry, reception desks, counters, and shelving for retail or office use. 

•  Commercial Kitchens & Food Service – Full compliance with health and safety regulations, grease traps, and ventilation. 

•  Medical & Healthcare Fit-Outs – Patient rooms, labs, and treatment areas designed for workflow and compliance with healthcare codes.
   

Fire Protection Systems

• Automatic sprinkler systems
   
• Standpipes and fire pumps
   
• Fire extinguishers and suppression systems
   
• Fire-rated doors, assemblies, and barriers
   

Alarm & Detection Systems

• Fire alarm panels, smoke detectors, and strobes
   
• Carbon monoxide detection systems
   
• Mass notification and emergency communication

Accessibility & Safety Compliance

• ADA-compliant ramps, handrails, and entrances
   
• Emergency egress lighting and signage
   
• Exit stairwells, fire escapes, and safe evacuation paths

Inspections & Certification

• Coordination with local fire marshals and inspectors
   
• Testing and commissioning of all safety systems
   
• Ongoing maintenance programs available

Parking Lot Construction

• Asphalt and concrete paving for high-traffic areas
   
• Striping, curbs, and signage for efficient traffic flow
   
• Heavy-duty pavement design for delivery and loading zones
   

Stormwater Management

• Retention/detention ponds
   
• Drainage systems and permeable paving solutions
   
• Compliance with environmental and municipal codes

Sidewalks & Hardscapes

• ADA-compliant sidewalks, ramps, and crosswalks
   
• Decorative pavers, outdoor seating areas, and pedestrian walkways
   
• Safe and functional access points around the site

Lighting & Safety Features

• Parking lot and perimeter lighting systems
   
• Security bollards and access controls
   
• Wayfinding signage and pedestrian safety features
   

Standby Generator Installation

• Diesel, natural gas, and propane systems sized for full-building or critical systems
   
• Automatic transfer switches for seamless power transitions
   
• Sound-attenuated enclosures for noise-sensitive environments
  
   

Uninterruptible Power Supply (UPS) Systems

• Battery backup for IT rooms, data centers, and medical facilities
   
• Protection against surges, spikes, and short-term outages

Load Analysis & Engineering

• Assessing business-critical systems and designing backup power solutions to match
   
• Ensuring compliance with NFPA 110 and local electrical codes

Maintenance & Testing Programs

• Routine inspection and servicing to ensure readiness
   
• Load bank testing and emergency operation drills
   

Medical & Healthcare Facilities

• Patient rooms, surgical suites, and urgent care centers
   
• Medical gas piping, sterilization areas, and specialized HVAC
   
• Compliance with OSHA, ADA, and healthcare regulations
   

Hospitality & Food Service

• Restaurants, hotels, and commercial kitchens
   
• Grease traps, commercial-grade ventilation, and fire suppression systems
   
• Guest-focused design with durable, easy-to-clean finishes

Retail & Shopping Centers

• Anchor tenant and multi-tenant fit outs
   
• Storefront glazing, signage, and lighting systems
   
• High-traffic flooring and customized layouts for customer flow

Educational & Institutional

• Classrooms, auditoriums, and athletic facilities
   
• Safety systems, accessibility compliance, and acoustical design
   
• Durable finishes for long-term, high-volume use
   

Emergency Response & Mitigation

• Rapid deployment for roof tarping, water extraction, and debris removal
   
• Securing unsafe areas to protect tenants, customers, and employees

Damage Assessment & Documentation

• Comprehensive inspections for roofs, structures, interiors, and mechanical systems
   
• Photo, video, and written documentation for insurance adjusters

Insurance Claim Assistance

• Working directly with insurance providers and adjusters
   
• Providing scope of work and cost breakdowns for approval
   
• Streamlining the claims process for faster restoration

Full-Service Restoration & Reconstruction

• Roof repair/replacement, structural rebuilds, and water remediation
   
• Interior and exterior restoration to pre-loss condition or better
   
• Code upgrades where required by city or county authorities

Solar Feasibility Studies

• Site and roof assessments for solar potential
   
• Energy usage analysis and ROI projections
   
• Structural review to ensure roof or site readiness

Commercial Solar Installation

• Rooftop solar arrays for offices, retail, and industrial spaces
   
• Ground-mounted solar farms for large-scale facilities
   
• Carport and canopy solar systems for parking areas

Integration & Energy Management

• Connection to existing electrical infrastructure
   
• Net-metering setup with local utility providers
   
• Smart energy monitoring and management systems

Maintenance & Performance Optimization

• Panel cleaning and inspection services
   
• Ongoing monitoring for peak efficiency
   
• Warranty and service support for long-term savings
   

Building Automation Systems (BAS)

• Centralized control of HVAC, lighting, and access systems
   
• Energy optimization through scheduling and occupancy sensors
   
• Remote monitoring and management capabilities

Security & Access Control

• Keycard and biometric entry systems
   
• Smart surveillance cameras and video management
   
• Integrated alarm and emergency response systems

Energy Management Solutions

• Smart meters and energy monitoring dashboards
   
• Automated lighting and climate control for cost savings
   
• Integration with solar and renewable systems

Tenant Experience & Comfort

• Smart conference rooms and AV setups
   
• Wi-Fi, data cabling, and IT infrastructure integration
   
• Environmental comfort systems to improve workplace satisfaction
   

Commercial Landscaping

• Native and low-maintenance plantings for sustainability
   
• Irrigation systems with smart water management
   
• Seasonal updates and year-round property care

Hardscapes & Outdoor Amenities

• Walkways, plazas, and outdoor seating areas
   
• Retaining walls, decorative concrete, and pavers
   
• Courtyards, patios, and green spaces for tenant use

Exterior Lighting & Safety

• LED site lighting for energy efficiency
   
• Pathway and accent lighting to highlight architecture
   
• Security and safety-focused illumination

Outdoor Tenant & Customer Spaces

• Dining patios, smoking areas, and lounge spaces
   
• Shade structures, pergolas, and canopies
   
• Functional outdoor areas designed for comfort and engagement
   

Construction Site Cleanup

• Removal of construction dust, dirt, and debris
   
• Cleaning of floors, windows, fixtures, and surfaces
   
• Detailing for presentation-level quality

Haul Away & Waste Management

• Flat-rate and custom-rate removal services for leftover materials
   
• Recycling and eco-friendly disposal options
   
• Coordination with local waste management and compliance agencies

Final Walkthrough & Punch List

• Joint inspections with owners, tenants, and stakeholders
   
• Addressing punch list items for complete satisfaction
   
• Verification of code compliance and safety standards

Project Turnover & Handover

• Delivery of warranties, maintenance manuals, and as-built documents
   
• Orientation for building systems and equipment
   
• Official turnover of keys and access control